Step 1: Prep Make sure your machine is warm and ready to go.
- The on/off button can be found either as a toggle switch on the back or a push button on the top
- Choose your pouch setting, either 3 mil or 5 mil depending on the thickness of the pouch you are working with
- Warm up times can take between 1-6 minutes depending on your machine, your machine is warm enough to start laminating once the ready light illuminates.
- If your machine has a feeding tray, ensure it is extended in the ready position
| Step 2: Place Place your project inside the laminating pouch.
- Center your item inside the pouch checking that you leave laminate margin on every side for best sealing results
- Have some fun with it by stacking multiple layers of colorful paper, confetti or lettering on top of one another
| Step 3: Insert Place the Sealed End of the pouch into the machine, with the open end following behind.
- Check to make sure the pouch lines up to the opening to prevent an uneven or angled feed through
- Remove any objects that could get in the way of your project as it feeds out of the machine
| Step 4: Seal Let the laminator do its thing!
- Avoid pulling or obstructing the pouch as it feeds through the laminator
- Your project will be hot when it exits the machine so use caution
Helpful tip: Cut/trim pouches only AFTER feeding through the machine |
